Jbird
-
Posts
2,156 -
Joined
Content Type
Profiles
Downloads
Forums
Store
Support
DOWNLOADS EXTRA
Services
Everything posted by Jbird
-
Are you ensuring that you are killing the same boss that you have configured this way? Or are all bosses set up with this method? Do you get any errors when reloading the plugin or when you kill one of the bosses? What loot are they dropping instead, if any?
-
Accurate as hell. As is usual for a wizard, this was fixed in short time when our schedules aligned. We dug in deep and sorted it out. I do get to at least say that one of my initial assumptions was correct! It's all @Sabby's fault! hahaha (I'm kidding). A little bit of debugging and a bit of testing on my end and it's all sorted. I hadn't heard of anyone else having the problem yet, but if they didn't already, as long as they stay up to date on their plugins then soon they will not have to worry about it. Just wanted to publicly thank you again for the plugins you have created and all that you do to support them @Steenamaroo!- 424 comments
-
- 2
-
-
- #statistics
- #leaderboard
- (and 12 more)
-
Generally it is best to seek support on the account you purchased a plugin on. But that being said, reload the plugin and you can share what you get in console. This should lead to where there might be an error. -
Just as a follow up, still no animals being counted after another wipe. Was hoping whatever bug got in would get squished with a wipe but will disable that category and come back to it later. If I get caught up on some stuff I'll mess about testing it. If I figure anything out I'll let you know. Scratching my head on this one for sure.
-
Do you have a link to the plugin you are referring to? I'm not familiar with it. Sounds like another that I've seen before but I do not recognize it by name. It should already be displayed in chat though, there are options in the lang folder for this. Have you noticed them?
-
Thank you for the feedback, the idea, and the understanding. We will look into this and get back to you soon. I may have an idea that could work, but my only concern with it is that since this plugin is not using ZoneManager, I am not sure how simple or difficult it might be to incorporate into what you are already using. If an alternate way to see that the area were PvP would that still be acceptable? Just asking as we look into a potential resolution.
-
@S1L3NT do you already have a plugin that adds this to most PvP zones automatically? The plugin does not do it by itself. I have not tested it myself with a plugin that does this but I do know that they exist. They may already be compatible or be made to be compatible. I'll add this to the suggestion bank though as this gives me an idea for how it could be implemented into the event plugins. Thank you for sharing the idea. If you are looking for a short term way to do this you may consider looking for the plugin(s) that already show PvP and PvE so that we can test if it already works.
-
@kategrrrl When you reload the plugin, do you see any errors in console? KpucTaJl's plugins are generally created with some debugging that will happen when the plugin is loaded. There are a couple images that come with the plugin if you use the countdown UI. This is set to true by default so this is the most likely error that you are running into. There is now a much nicer looking small countdown UI that pops up on the top of the screen in the Event zone. oxide/data/Images If you do not have this folder, you can create it, or drag it over from the unzipped download. If you create it then just drag over the 2 image files from inside the unzipped download into the newly created Images folder. Clock_KpucTaJl.png Tab_KpucTaJl.png Once you have those files installed you should be good on a reload of the plugin. If for any reason this isn't the problem and you need more support please let me know. ---------------------------------------------------------- @HellHunter just to be sure, you were able to sort out the above and get the plugin working for yourself, correct?
-
Please confirm that you have the most recent version, and that your server files have been updated as well. This was an issue when the plugin was first released but was fixed back in June. Alternatively if you have a plugin that affects sleepers, moves them temporarily, or something along those lines, this plugin might be the culprit and needs patched if it has not also been updated already. -
"Minimum time between events [sec.]": 6600.0, "Maximum time between events [sec.]": 7200.0, "Is active the timer on to start the event? [true/false]": true, It needs set true as above and then set the minimum and maximum to a length that you'd like in seconds. -
Are you by chance in the Mad Mappers Discord? Might be easier to jump in there and share your config. If I had to guess there is something extra or something missing in the config. You got the error trying to start the event right? Otherwise you can also reload the plugin and let me know what it says there. Might also lead to the error. oxide.reload AirEvent Enter that into console and let me know what console spits out. -
Did you try this one? He sent it twice. First found groups but wasn't showing permissions. The one above was showing both again.- 190 comments
-
- 2
-
-
- #permissions
- #admin
- (and 7 more)
-
Was late on even seeing the 1st one but can confirm the 2nd one you sent had everything popping back up again. Pretty work Steenamaroo, quick too! Thank you. My OCD appreciates it!
- 190 comments
-
- 2
-
-
-
- #permissions
- #admin
- (and 7 more)
-
As far as the doors I believe any of the doors trigger them all. Helps cut down a bit on resources in case the event isn't actually played by anyone then it's only ever going to spawn the guys up top. I believe that especially in the earlier iterations, KpucTaJl had not done nearly as much as he has done recently. Since they were under the water level there was no way to get them to move. Potentially also because of what the submarine is built out of, it would require an update to the prefab itself for them to be able to move around inside it. Due to NPCs wanting to clip through so many different things it makes plugins like AirEvent and WaterEvent easier to just have them be stationary. That being said though I'm forwarding this along as a suggestion so don't be surprised to see an update in the future that allows these guys to move around a bit. Just can't promise anything since like I said they like to just phase through some things without putting triggers all over the place to try to stop them. Stay tuned in that regard!
-
Not sure what you mean about intentional but my point is that they are working fine by command but the plugin that I am writing a response in, PermissionsManager, is not seeing or showing those permissions. The oxide issue was fixed to my knowledge with an oxide update and I'm not worried about that because permissions that had stopped working were fixed relatively quickly when that was found. My problem is the plugin I've been using to easily navigate them is no longer recognizing them. I'm not worried about oxide until such as a time as they would stop working again due to the mixed case subject. I can turn them on and off with command but I cannot see them to check on them more easily in PermissionManager. This is a free plugin so I'm not going to lose sleep over it just making sure you understasnd that the plugin isn't showing permissions, has nothing to do with whatever may or may not happen on oxides side.
- 190 comments
-
- 1
-
-
- #permissions
- #admin
- (and 7 more)
-
Sorry you feel that way but there are several ways to get support and help. I was hired by the developer to help with support and I check all of his plugins on multiple sites, as well as monitor multiple Discord servers to support his works every single day. He is always available if needed but it isn't needed 99% of the time, that's why he recruited me. So if you are needing help and haven't gotten it then that is on you, there are plenty of places that we offer assistance. So yes regardless of where you go to say the same thing, you are going to get the same answers from me in each place you go. BotReSpawn and BetterNpc do most of the same things. Plugins like that can sometimes be made to work together but without any context of what you are trying to do all I can ask is why do you have two plugins that do the same things? Plugins that are spawning NPCs end up using similar or same code in the game and conflict with each other. This is only ever solved if the developers get feedback and context to the issues. The creator doesn't speak English without using a translator so that is one of the many reasons you are talking to me instead. I assure you that the developer gets feedback, suggestions, and is called upon when needed. Generally that doesn't happen but it does when it is needed. We need context and details for that to happen. Sorry that you are frustrated, and having a hard time. I am here to help and the Developer is as well. -
Have you broken into the submarine with this configuration to test them? Or are you just looking at the event with radar? The NPCs inside the sub should appear when you break the submarine. If not when you reload the plugin, can you share what text you get after that? oxide.reload WaterEvent That would let us know if there were any errors.
-
Just noticed that I have at least one permission that I went to check on one of my servers, that isn't showing up. So this must still be somewhat of a thing. I was thinking it was already sorted since they are all working. But I have at least one that I know of that isn't showing up for me inside permission manager. I can manually add or remove the permission. Typing it all in lower case worked fine as well as typing it with mixed case. Just feedback not a major issue but happened to notice it today.
- 190 comments
-
- 2
-
-
- #permissions
- #admin
- (and 7 more)
-
Fair @Hawkhill as long as you see that the config is able to be adjusted to suit your server. I think removing the locks makes it a bit too easy and takes away from the story of having to break in. But I understand it being easier or harder depending on the server. That part makes sense.
-
Almost everything is configurable as was already expressed. So definitely have at it customizing this to your liking. I have to say I am confused on why unlocking the doors makes sense though. Where is the challenge at that point? There is almost no cost to the player at so you will definitely want to lower the loot in my opinion if you are moving in the direction of making it that easy to get inside.
-
Yeah no worries I thought that was what you meant too. I could have more clearly said that I do use that option. I was just saying that even if it does cause it, I would most likely keep that anyway because the sound effect is awesome and players love it. Take your time with the startup issue. If I can help with testing you can let me know. My Discord DMs are open. I can test it on one of my quiet servers to see if its still persisting once you get it to a testable state. -
No worries. I often am up until the sun comes up again so I get it. 😂
-
Is this related to Defendable Bases in some way? Just confirming you are saying that this is the plugin you are referring to. There are options for what this plugin will remove in an event area. That can be adjusted if that is indeed what you are having an issue with. Alternatively you can also remove spawn points for the event if it spawns at one of the places that this plugin spawns Bradley tanks in the configs as well. If you have not already I would recommend letting that developer know that this issue is occurring so that they can look into it from their end. Perhaps a check can be added for when a Bradley is removed by a plugin, and have it ignore when this happens in reference to Rust Rewards. -
Nope, but I am lucky enough to call him a friend. He hired me to handle discussions and support for him. English is not his first language and he wanted to try to free himself up to focus on updates and new plugins. I also became an expert with his plugins and have been a member of their team for awhile now. Thank you for the compliment! haha Also sorry if I gave that impression at any point, it wasn't intentional. I'm just the new go to guy for his plugins.
- 429 comments
-
- 1
-
-
- #abilities
- #boss
- (and 16 more)
