Jump to content

Furnace Levels 1.4.6

$7.99
   (10 reviews)
Message added by David,

Due to facepunch's changes and additions to furnace system, this plugin is no longer maintained therefore not available for purchase.

5 Screenshots

Recommended Comments



Darien

Posted

bro,The player said that the stove needs to be purchased again to relocate

Zoreeno

Posted

3 hours ago, CM1234 said:

bro,The player said that the stove needs to be purchased again to relocate

From the description of the plugin....

Quote

Upgrades are tied to specific furnace placed, upon picking it up levels are lost. 

 

iamallama

Posted

So I might be missing something, but with this update to FurnaceLevels, the furnaces are MUCH slower than even vanilla. We can smelt from multiple slots which appears to be good (this should maybe be it's own upgrade. Ability to smelt from 1-5 slots on a furnace to increase speed). But each tick only smelts 1 ore. On vanilla, each tick smelts 15 at a time.

  • Like 1
Shoyqn

Posted

same

 

ChristopherS

Posted

On 9/21/2022 at 6:59 PM, iamallama said:

So I might be missing something, but with this update to FurnaceLevels, the furnaces are MUCH slower than even vanilla. We can smelt from multiple slots which appears to be good (this should maybe be it's own upgrade. Ability to smelt from 1-5 slots on a furnace to increase speed). But each tick only smelts 1 ore. On vanilla, each tick smelts 15 at a time.

I noticed that also. I think a workaround could be to increase the speed bonus in the config. 

  • Like 1
David

Posted (edited)

1 minute ago, ChristopherS said:

I noticed that also. I think a workaround could be to increase the speed bonus in the config. 

I was about to say, you can always change default values if furnaces feel slow

Edited by David
BetterDeadThanZed

Posted (edited)

This is very vague, beacuse well... Rust players be Rust players, but I had a player tell me this:

Quote

furnace upgrades seem to not be working

output is fully upgraded, still only smelts 1 : 1 ratio. large and small both.

Anyone having issues since the latest Rust update?

Edited by BetterDeadThanZed
  • Like 1
Omega

Posted

Just updated after yesterday wipe and works fine for me.

Salatschleuder

Posted

We have the same problem, it only burns 1:1, equal on what stage it is. only the burning speed is affected with the config

BetterDeadThanZed

Posted

I tested and it works fine. He didn't realize that Output is a chance of extra output, not a flat amount. I saw a difference between an upgraded output vs an non upgraded furnace. 

Rust Admin

Posted

9 hours ago, BetterDeadThanZed said:

I tested and it works fine. He didn't realize that Output is a chance of extra output, not a flat amount. I saw a difference between an upgraded output vs an non upgraded furnace. 

The output can be a flat output like it was previously.

Search for 'flatOutput' in the .CS file

  • Like 1
Zoreeno

Posted (edited)

I did some testing with a stop watch. It seems that if you leave the default level (level 1) at 0.5, the Small Furnace smelts slightly faster than Rust default (about 1.5x) but the Large Furnace smelts 1/2 the speed (about 0.7x) than Rust default. You can tune that down to 0.4 and the Small Furnace will be about 2x the default Rust speed but the Large Furnace is still under the default Rust speed (about 0.85x).  I didn't start getting default Rust smelting speeds on the Large Furnace until i set it to around 0.35, which at that point the Small Furnace was smelting at about 2.4x Rust default speeds. 

image.png.07972fb19028845f65e3044dc839dc60.png

These tests where using Metal Ore with all slots full. Some of the results varied as it almost seems like default Rust doesn't always smelt at the exact same speed every time, the start up is slower sometimes, it's weird. But these numbers are fairly accurate. 

I don't know if this is even fixable to have a flat rate increase on both the small and large furnaces at the same time with the way FP redesigned oven smelting/cooking. But if anyone can figure it out, Its David 🙂 Maybe the only way is to have a different value in the config for Small vs Large furnaces? 

 

Edited by Zoreeno
BetterDeadThanZed

Posted

1 hour ago, Zoreeno said:

I did some testing with a stop watch. It seems that if you leave the default level (level 1) at 0.5, the Small Furnace smelts slightly faster than Rust default (about 1.5x) but the Large Furnace smelts 1/2 the speed (about 0.7x) than Rust default. You can tune that down to 0.4 and the Small Furnace will be about 2x the default Rust speed but the Large Furnace is still under the default Rust speed (about 0.85x).  I didn't start getting default Rust smelting speeds on the Large Furnace until i set it to around 0.35, which at that point the Small Furnace was smelting at about 2.4x Rust default speeds. 

image.png.07972fb19028845f65e3044dc839dc60.png

These tests where using Metal Ore with all slots full. Some of the results varied as it almost seems like default Rust doesn't always smelt at the exact same speed every time, the start up is slower sometimes, it's weird. But these numbers are fairly accurate. 

I don't know if this is even fixable to have a flat rate increase on both the small and large furnaces at the same time with the way FP redesigned oven smelting/cooking. But if anyone can figure it out, Its David 🙂 Maybe the only way is to have a different value in the config for Small vs Large furnaces? 

 

I brought up a similar issue with David. I found with the plugin unloaded, small and large furnaces smelt faster than they do with the plugin loaded and without the furnaces upgraded at all. I'm waiting to see if there will be an update.

RickJamesBitch

Posted

@Davidyeah the furnace levels are broken - I have been away from my server for a week and a half and came back to many reports of furnace levels no longer working 😞 sadness

BetterDeadThanZed

Posted

21 minutes ago, RickJamesBitch said:

@Davidyeah the furnace levels are broken - I have been away from my server for a week and a half and came back to many reports of furnace levels no longer working 😞 sadness

I ended up removing it from my server until/if an update comes out.

RickJamesBitch

Posted

2 hours ago, BetterDeadThanZed said:

I ended up removing it from my server until/if an update comes out.

Double sadness - yeah I did too. Its unfortunate that David cannot update it anymore. 

David

Posted

So, just to clarify all this, facepunch completely changed how smelting works, ui, values, speed etc. Hence default values for furnaces in FurnaceLevels are not same as vanilla smelting rates, however this can be adjusted to some extend by changing level 1 speed and fuel consumption values.

This is clip from freshly installed server with no other plugins, it works exactly how it was before, 4 wood burned for each sulfur smelted. Can be also compared with this video from previous update -> https://youtu.be/DkBS7iAzgyM


 

RickJamesBitch

Posted

2 hours ago, David said:

So, just to clarify all this, facepunch completely changed how smelting works, ui, values, speed etc. Hence default values for furnaces in FurnaceLevels are not same as vanilla smelting rates, however this can be adjusted to some extend by changing level 1 speed and fuel consumption values.

This is clip from freshly installed server with no other plugins, it works exactly how it was before, 4 wood burned for each sulfur smelted. Can be also compared with this video from previous update -> https://youtu.be/DkBS7iAzgyM

Thanks David - will try this out tonight

BetterDeadThanZed

Posted

@ZoreenoMade an excellent post showing the results of testing. If you get the large furnace to vanilla level without being upgraded, the small furnace will function about 2.4x faster than vanilla when not upgraded: 

 

william long

Posted

hi there is there a way we can put scrap as a payment to upgrade

 

Zoreeno

Posted

12 minutes ago, william long said:

hi there is there a way we can put scrap as a payment to upgrade

 

  "Main Settings": {
    "Currency Type": "Item",
    "Currency Display Name": "Scrap",
    "Currency Item ID (only if type is Item)": -932201673,

 

N3UR0515

Posted

On 9/7/2021 at 10:18 AM, DeX said:

I think for speed limit is 0.00001

Not Fast our admin got this and removed it for quick smelt.

N3UR0515

Posted

On 9/7/2021 at 10:18 AM, DeX said:

I think for speed limit is 0.00001

Not Fast our admin got this and removed it for quick smelt.

Robis

Posted

David if you change skin on already upgraded furnace, it loses lvls

Rahd

Posted

Why is the plugin no longer available? I would like to buy it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Like 6
  • Love 16

David's Collection

User Feedback

1.4m

Downloads

Total number of downloads.

6.9k

Customers

Total customers served.

102.6k

Files Sold

Total number of files sold.

2.1m

Payments Processed

Total payments processed.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.