Manual Sprinkler

Adding a sprinkler nearby (e.g. above) results in the water being disconnected on server reload.
When you go to add the pipe back onto sprinkler it says that it is connected to the fluid splitter.
It's as if when the server starts back up or you have been inactive from the farm it looks for the nearest input to the farm and auto-connects to that instead.

If you tell the plugin (via config) not to use sprinklers it still adds the splitter to the planter box.
 

Also, could you make some kinda way where it uses combiners instead of splitters, as every input to a splitter halves the water.

so say for example 10 planters running from 2 pumps is 24 water.
as soon as you connect the water to the second splitter you only have 12 water left, then 6 and so on.

When you say Above how close is the sprinkler above?

Try this. for the sprinkler issue also added genetics

Changed Status from Pending to Work in Progress

So far so good. 
All sprinklers still running.

not sure if i really could use combiners as that has only one output. 

Changed Status from Work in Progress to Closed