remote Power Toggle conflicts with Simple Switch

Hi,

i encountered some kind of problem - i want to control my turrets via a smart switch, which turns on power if activated. so, when the sentry is connected to an active power source, and the sentries switch is ON -> everything is fine. when the power source is turned off, the sentry will be offline, too.  After enabling the power again, the sentry stays offline - with it's switch in position ON. Settings the switch to OFF then activates the sentry, which i think is unintended...

16 hours ago, Christian W said:

Hi,

i encountered some kind of problem - i want to control my turrets via a smart switch, which turns on power if activated. so, when the sentry is connected to an active power source, and the sentries switch is ON -> everything is fine. when the power source is turned off, the sentry will be offline, too.  After enabling the power again, the sentry stays offline - with it's switch in position ON. Settings the switch to OFF then activates the sentry, which i think is unintended...

Switch works only as trigger to turn on or off the turret. It doesn't matter in which position it stays for turret, it just toggles state.

Ok, that's a bit unexpected. Thank you for the explanation. So, turning off the power of the sentry is a bad idea, because the sentry needs to be manually switched on after that. I thought about using the toggles of the simple switch, will that work?

Changed Status from Pending to Closed