Search the Community

Loot Table & Stacksize GUI 10x Loot Table config -Removed Junk Loot -Improved Scientist Loot -Better Loot Rates -Heli and Bradley Loot Table How to Install: 1. Unload the plugin by typing the following into your F1 Console or Admin Console: o.unload Loottable 2. Navigate to oxide>data 3. Delete the current "Loottable" file. 4. Upload the unzipped Loottable file to oxide>data 5. After everything has finished uploading please type o.load Loottable Alternative: If the steps above do not work with your host provider please follow these steps: 1. Download FileZilla (alternative link: https://filezilla-project.org/) 2. After launching file zilla, log in with your info on the top starting with "Host: ____" NOTE: If you do not know your info please ask your host provider for help. 3. Now you can follow the original install steps!

Loot Table & Stacksize GUI 2x Loot Table config -Removed Junk Loot -Improved Scientist Loot -Better Loot Rates -Heli and Bradley Loot Table How to Install: 1. Unload the plugin by typing the following into your F1 Console or Admin Console: o.unload Loottable 2. Navigate to oxide>data 3. Delete the current "Loottable" file. 4. Upload the unzipped Loottable file to oxide>data 5. After everything has finished uploading please type o.load Loottable Alternative: If the steps above do not work with your host provider please follow these steps: 1. Download FileZilla (alternative link: https://filezilla-project.org/) 2. After launching file zilla, log in with your info on the top starting with "Host: ____" NOTE: If you do not know your info please ask your host provider for help. 3. Now you can follow the original install steps!

Loot Table & Stacksize GUI 3x Loot Table config -Removed Junk Loot -Improved Scientist Loot -Better Loot Rates -Heli and Bradley Loot Table How to Install: 1. Unload the plugin by typing the following into your F1 Console or Admin Console: o.unload Loottable 2. Navigate to oxide>data 3. Delete the current "Loottable" file. 4. Upload the unzipped Loottable file to oxide>data 5. After everything has finished uploading please type o.load Loottable Alternative: If the steps above do not work with your host provider please follow these steps: 1. Download FileZilla (alternative link: https://filezilla-project.org/) 2. After launching file zilla, log in with your info on the top starting with "Host: ____" NOTE: If you do not know your info please ask your host provider for help. 3. Now you can follow the original install steps!

Loot Table & Stacksize GUI 5x Loot Table config -Removed Junk Loot -Improved Scientist Loot -Better Loot Rates -Heli and Bradley Loot Table How to Install: 1. Unload the plugin by typing the following into your F1 Console or Admin Console: o.unload Loottable 2. Navigate to oxide>data 3. Delete the current "Loottable" file. 4. Upload the unzipped Loottable file to oxide>data 5. After everything has finished uploading please type o.load Loottable Alternative: If the steps above do not work with your host provider please follow these steps: 1. Download FileZilla (alternative link: https://filezilla-project.org/) 2. After launching file zilla, log in with your info on the top starting with "Host: ____" NOTE: If you do not know your info please ask your host provider for help. 3. Now you can follow the original install steps!

Alpha Loot 2x Loot Table config -Removed Junk Loot -Better Loot Rates -Heli and Bradley Loot Table To install go to oxide>data>AlphaLoot>LootProfiles

Alpha Loot 10x Loot Table config -Removed Junk Loot -Better Loot Rates -Heli and Bradley Loot Table To install go to oxide>data>AlphaLoot>LootProfiles

Alpha Loot 3x Loot Table config -Removed Junk Loot -Better Loot Rates -Heli and Bradley Loot Table To install go to oxide>data>AlphaLoot>LootProfiles

Alpha Loot 5x Loot Table config -Removed Junk Loot -Better Loot Rates -Heli and Bradley Loot Table To install go to oxide>data>AlphaLoot>LootProfiles

Advanced Hit Bar will show the players the health information of the player or certain entities the player is shooting. This plugins comes with a nice UI and the ability to customize it. Important: This plugin depends on Image Library It also works with other plugins that modifies players health like Better Metabolism. Permissions: advancedhitbar.use - Players with this permission will be able to see the Hitbar when shooting (If perms are enabled from config). advancedhitbar.edit - Players with this permission will be able to edit the Hitbar color (If perms are enabled from config). Commands: /hitbar - Opens the Hitbar color config. /hitbar on/off - Enables/Disables the hitbar. /hitbar help - Show brief information on chat. Configuration: { "Plugin Settings": { "- Only users with perms can see the alert": false, "- Time alert will be displayed (Seconds)": 3.0, "- UI Anchor Min": "0.356 0.117", "- UI Anchor Max": "0.63 0.158", "- Config Text": "HITBAR SETTINGS", "- Config Color": "#ffffff", "Copter - Enable health bar": true, "Bradley - Enable health bar": true, "Players - Enable health bar": true, "NPC - Enable health bar (Animals, Scientists, Scarecrows, etc.)": true, "Minicopter - Enable health bar": true, "ScrapCopter - Enable health bar": true, "Deployables - Enable health bar": true, "Building Blocks - Enable health bar": true, "All Entities - Enable health bar": false, "Show hitbar when damage type is fire (Not Recommended)": false, "- Accept button text": "ACCEPT", "- Close button text": "CLOSE", "- Config Chat command": "hitbar", "- Config Custom Players Health (ONLY CHANGE THIS IF YOU CHANGED THE DEFAULT PLAYERS HEALTH)": 100, "- Config Custom Players Health (Assign the perm to the the players that have different health)": { // Only assign this perms to the players if you changed their max health (Example: Better Metabolism) "advancedhitbar.vip": 150, "advancedhitbar.vip1": 200 } } }

This is a server management plugin. It allows you to have consistency and visibility over all the information related with your server, including it's basic configuration. You may find this valuable no matter if you manage ONE or TEN servers, it works great with automation tools, docker and alike. It has four main features: Wipe schedule calculator Manages server information (Title, description, tags, logo, banner, etc) Manages the basic server configuration (cvars) Manages Oxide's groups, permissions and user membership. Loading messages when a player is joining and/or waiting in queue. Timed messages (adverts) Public chat command "!wipe" that will inform: Last wipe date Next wipe date The current time in UTC Support the new Nuclear Missile Silo computer countdown 1. Wipe schedule calculator The plugin provides four "tokens" that you can use within the server's title or description to inform your users when was the last wipe and when it will be the next wipe. You can customize the date format and wipe schedule on the config file and the wipe schedule calculator will have into account the Thursday forced wipe. // You can format the date as you'd like "Date": { "Short": "dd/MM", "Long": "dd/MM/yyyy" }, // Wipe schedule value is in days "Server": { "Wipe schedule": 7 }, 2. Manages server information This one is pretty self-explanatory, it allows you to define all the metadata about your server. "Server": { "Name": "DEVELOPMENT SERVER | %LASTWIPE%", "Description": [ "Map size is %WORLDSIZE% using seed %WORLDSEED%.", "Last wipe was at %LASTWIPE_LONG%, Next wipe is at %NEXTWIPE_LONG%", "Server has %UPTIME% seconds uptime, running at %FPS% fps with %ONLINE%/%MAXSLOTS% players online." ], "Banner image": "https://assets.example.com/banner.jpg", "Logo image": "https://assets.example.com/logo.png", "Tags": [ "weekly", "vanilla" ], "Website": "https://example.com/", "Custom map name": "kasvoton was here", "Wipe schedule": 7 }, Notice the special feature "Custom map name" which allows you to customize the map name that is displayed on the server list (Procedural Map). This shows in not only at Rust's in-game server browser, but also all on all the other sites that show off your server, i.e. Battlemetrics. WE DO NOT REQUIRE OXIDE'S SANDBOX MODE TO BE TURNED OFF AS OTHER PLUGINS DO. 3. Manages the basic server configuration (cvars) It allows you to have a clear view of what cvars are applied, very helpful if you run automation tools such as docker or github to manage server configurations. "CVars": { "fps.limit": "32", "server.tickrate": "10", "server.censorplayerlist": "true", "server.maxplayers": "8", "env.time": "12", "env.progresstime": "false" }, 4. Manages Oxide's groups, permissions and user membership. When you define a group inside the plugin's config file it means that the plugin will make sure that the group is created, that the permissions are assigned and that the listed members are part of the group. You can (and should) assign users to your groups using the oxide's tools or any other third party plugin as usual, the only difference is that the members listed on this config file will always be added back to the groups even when manually removed. "Permissions": { "Delay": 60.0, "Groups": [ { "Name": "admin", "Title": "Administrators", "Parent": "developer", "Rank": 0, "Default": false, "Permissions": [], "Members": [] }, { "Name": "default", "Title": "Default", "Parent": null, "Rank": 0, "Default": true, "Permissions": [], "Members": [ "*" ] }, { "Name": "developer", "Title": "Developer", "Parent": "administrator", "Rank": 800, "Default": false, "Permissions": [ "plugin.e", "plugin.f" ], "Members": [ "123456789123456789" ] }, { "Name": "administrator", "Title": "Administrator", "Parent": "moderator", "Rank": 80, "Default": false, "Permissions": [ "plugin.b", "plugin.c", "plugin.d" ], "Members": [ "123456789123456789", "123456789123456789" ] }, { "Name": "moderator", "Title": "Moderator", "Parent": "default", "Rank": 60, "Default": false, "Permissions": [ "plugin.a" ], "Members": [ "123456789123456789", "123456789123456789", "123456789123456789" ] } ] } Note the important config parameter "Delay", when the server starts we have no way to tell in which order the plugins will get loaded by Oxide, which means that when OxidationMetadata loads it's probable that we will not be the last one getting loaded. If we try to assign a permission to a group but the third party plugin has not yet loaded then the permission is not found and we'll get an error. The "Delay" creates a waiting period for OxidationMetadata to wait for all other plugins to load and only then it tries to assign the permissions, the value of the delay is really dependent of your own server. List of supported string format "tokens": %FPS% Average FPS value on the server %MAXSLOTS% Max number of players on the server %ONLINE% Total number of online players %UPTIME% Server uptime in seconds %WORLDSEED% Seed used to generate the world %WORLDSIZE% World size i.e. 3500 %LASTWIPE% Last wipe date formatted in short form %LASTWIPE_LONG% Last wipe date formatted in long form %NEXTWIPE% Next wipe date formatted in short form %NEXTWIPE_LONG% Next wipe date formatted in long form

This plugins allows you to fine tune the settings about the Airdrop event such as frequency, speed, cargo drop mass and speed. To control the frequency, you can define a max and min duration between each airdrop event. If you don't want any randomization, just set the max and min with the same value. "AdditionalEvents": { "Enabled": false, "Min": 300.0, "Max": 600.0 }, The following config controls the "delay" between the start of the airdrop event (either it is server wide or called in by an user) and the drop of the cargo at the spot. In a nutshell it will make your planes fly must faster aka airspeed. "Airplane": { "Speed": { "Enabled": false, "Min": 70.0, "Max": 80.0 } }, You can change the duration of the supply signal smoke. "Signal": { "Duration": 110.0 }, Finally you can also adjust the time it takes for the dropped cargo to reach the ground by changing it's mass and drag values. "Cargo": { "Mass": { "Enabled": false, "Min": 20.0, "Max": 20.0 }, "Drag": { "Enabled": false, "Min": 2.5, "Max": 3.5 } }

Better Loot 10x Loot Table config -Removed Junk Loot -Better Loot Rates -Heli and Bradley Loot Table To install go to oxide>data>betterloot

Better Loot 3x Loot Table config -Removed Junk Loot -Better Loot Rates -Heli and Bradley Loot Table To install go to oxide>data>betterloot

Better Loot 2x Loot Table config -Removed Junk Loot -Better Loot Rates -Heli and Bradley Loot Table To install go to oxide>data>betterloot

Better Loot 5x Loot Table config -Removed Junk Loot -Better Loot Rates -Heli and Bradley Loot Table To install go to oxide>data>betterloot

x3 Optimized Loottables! all Loot Tables have been stripped of all junk and useless items to make the looting experience a little more enjoyable. So exactly what every server needs. if you want to have an individual table created or you don't like something don't hesitate to contact me REMOVED/ADDED Changelog: -balanced High tier loot (bradly,heli etc) -added revolver & pistol ammo to low tier crates -removed junk from high tier loot crates/events -balanced low tier loot (radtown,barrels etc) -lowered electrical loot by -1 per container

Discover our carefully crafted loot config for RaidableBases, striking the perfect balance between fair loot and non-overpowered (OP) rewards. This config is specifically designed to improve the gaming experience by removing unnecessary or outdated items from active gameplay. The config includes the following adjustments: Removal of all obsolete items no longer needed in active gameplay. Significant reduction of the frequency of OP items such as Autoturrets, C4, and Sulfur, maintaining game balance. Excellent addition to existing RaidableBases addons, like the complete packages from NIVEX, for adjusting loot and optimizing the player experience. Please note that this offer only includes the Loot Data Files and not the entire config of RaidableBases. Installation Instructions: Download the archive and extract its contents. Turn off the RaidableBases plugin on your server. Copy the contents of the extracted archive into the "/oxide/data/RaidableBases" folder. When prompted to overwrite existing files, confirm the action. Turn the RaidableBases plugin back on. By integrating this config into your existing setup, you'll achieve a fair and balanced loot system that maintains challenge and enjoyment without dominating gameplay. We hope you enjoy using this optimized loot config and experience an improved and fair gaming experience on Rust Server! Wishing you lots of fun, Doldak ------------------------------------------------------------------------------------ Deutsch: Beschreibung: Entdecken Sie unsere sorgfältig gestaltete Config für die Loot-Tabelle von RaidableBases, die ein ausgewogenes Verhältnis zwischen fairem Loot und nicht übermächtigem (OP) Loot bietet. Diese Config wurde speziell entwickelt, um das Spielerlebnis zu verbessern und unnötige oder veraltete Items aus dem aktiven Spiel zu entfernen. Die Config enthält folgende Anpassungen: Entfernung aller obsoleten Items, die im aktiven Spiel nicht mehr benötigt werden. Erhebliche Reduzierung der Häufigkeit von OP Gegenständen wie Autoturrets, C4 und Sulfur, um die Spielbalance zu wahren. Perfekte Ergänzung für bestehende RaidableBases Addons, wie die fertigen Pakete von NIVEX, um den Loot anzupassen und das Spielerlebnis zu optimieren. Bitte beachten Sie, dass es sich bei diesem Angebot lediglich um die Loot Data Files handelt und nicht um die gesamte Config von RaidableBases. Installationsanleitung: Laden Sie das Archiv herunter und entpacken Sie es. Schalten Sie das RaidableBases Plugin auf Ihrem Server aus. Kopieren Sie den Inhalt des entpackten Archivs in den Ordner "/oxide/data/RaidableBases". Wenn Sie dazu aufgefordert werden, ob vorhandene Dateien überschrieben werden sollen, bestätigen Sie dies. Schalten Sie das RaidableBases Plugin wieder ein. Durch die Integration dieser Config in Ihr bestehendes Setup erhalten Sie ein faires und ausgewogenes Loot-System, das die Herausforderung und den Spielspaß aufrecht erhält, ohne das Gameplay zu dominieren. Ich hoffe, dass Sie mit dieser optimierten Loot-Config viel Spaß haben und ein verbessertes sowie faires Spielerlebnis auf Ihren Server erleben! Viel Spaß wünscht Ihnen, Doldak

Hello there, This zip file will help you with all the config files you need to start your own rust 5x server. — THIS IS ONLY JUST CONFIG FILES NOT PLUGINS — You will have to install the plugins that will be linked above this Configs that come with this: If there is any problems with this config contact me at: Email: [email protected] OR Discord: Perc#0072

x10 Optimized Loottables! all Loot Tables have been stripped of all junk and useless items to make the looting experience a little more enjoyable. So exactly what every server needs. if you want to have an individual table created or you don't like something don't hesitate to contact me REMOVED/ADDED Changelog: -balanced High tier loot (bradly,heli etc) -added revolver & pistol ammo to low tier crates -removed junk from high tier loot crates/events -balanced low tier loot (radtown,barrels etc) -lowered electrical loot by -1 per container

x5 Optimized Loottables! all Loot Tables have been stripped of all junk and useless items to make the looting experience a little more enjoyable. So exactly what every server needs. if you want to have an individual table created or you don't like something don't hesitate to contact me REMOVED/ADDED Changelog: -balanced High tier loot (bradly,heli etc) -added revolver & pistol ammo to low tier crates -removed junk from high tier loot crates/events -balanced low tier loot (radtown,barrels etc) -lowered electrical loot by -1 per container

x15 Optimized Loottables! all Loot Tables have been stripped of all junk and useless items to make the looting experience a little more enjoyable. So exactly what every server needs. if you want to have an individual table created or you don't like something don't hesitate to contact me REMOVED/ADDED Changelog: -balanced High tier loot (bradly,heli etc) -added revolver & pistol ammo to low tier crates -removed junk from high tier loot crates/events -balanced low tier loot (radtown,barrels etc) -lowered electrical loot by -1 per container

x100 Optimized Loottables! all Loot Tables have been stripped of all junk and useless items to make the looting experience a little more enjoyable. So exactly what every server needs. if you want to have an individual table created or you don't like something don't hesitate to contact me REMOVED/ADDED Changelog: -balanced High tier loot (bradly,heli etc) -added revolver & pistol ammo to low tier crates -removed junk from high tier loot crates/events -balanced low tier loot (radtown,barrels etc) -lowered electrical loot by -1 per container

x2 Optimized Loottables! all Loot Tables have been stripped of all junk and useless items to make the looting experience a little more enjoyable. So exactly what every server needs. if you want to have an individual table created or you don't like something don't hesitate to contact me REMOVED/ADDED Changelog: -balanced High tier loot (bradly,heli etc) -added revolver & pistol ammo to low tier crates -removed junk from high tier loot crates/events -balanced low tier loot (radtown,barrels etc) -lowered electrical loot by -1 per container

x1 Optimized Loottables! all Loot Tables have been stripped of all junk and useless items to make the looting experience a little more enjoyable. So exactly what every server needs. if you want to have an individual table created or you don't like something don't hesitate to contact me REMOVED/ADDED Changelog: -balanced High tier loot (bradly,heli etc) -added revolver & pistol ammo to low tier crates -removed junk from high tier loot crates/events -balanced low tier loot (radtown,barrels etc) -lowered electrical loot by -1 per container

The plugin gives ability to admins to create several configs for other plugins, and update them automatically depending on time passed since last wipe. Examples Example 1 You have loot spawn plugin, and you want that after two days from last wipe, loot spawn rules to be changed (more loot, or less loot). Example 2 You want no NPCs in your server at all in first 10 hours after wipe, and then part of NPC appear, and make after 2 more days, many more NPC should appear. How It Works Main Flow On load the plugin scans it's data directory, and detects last wipe. Checks if any of configs should already be applied (last ones that closer to current time). Once a minute it checks if some configs should be updated. Update Process Target plugin is unloaded. Its config is replaced. Target plugin is loaded again. Localization The default messages are in the DynamicConfig file under the oxide/lang/en directory. To add support for another language, create a new language folder (e.g. de for German) if not already created, copy the default language file to the new folder and then customize the messages. The default messages are in the DynamicConfig file under the oxide/lang/en directory. To add support for another language, create a new language folder (e.g. de for German) if not already created, copy the default language file to the new folder and then customize the messages. Plugin uses only console messages to RCON. They could be localized. Out of the box the plugin supports EN localizations. Usage If you want to add any dynamic config, you should do these steps: Copy plugin config to oxide/config/DynamicConfig directory the DynamicConfig must be manually created. Edit the config name to meet naming syntax (below). Edit the config itself to meet your needs. Reload Dynamic Config if you're done. You can edit dynamic configs contents without reloading Dynamic Config (if they are yet to be applied), the plugin only reads the filenames and schedules the update time. Naming [] - optional [<number>d][<number>h][<number>m]<PluginName>.json Examples 2dMagicLoot.json - will be applied after 2 days from last wipe (exactly 48 hours) 10h20mTestConfig.json - after 10 hours and 20 minutes 10d10hBotSpawn.json - guess yourself